|This valve measures115x42x69mm overall and has an octal base
|Max resonator voltage||400V|
|Max resonator dissipation||20W|
|Reflector voltage range||-80 to -165V|
|Min RF power output||15mW|
|Mechanical tuning range||9320 to 9500MHz|
|Min electronic tuning range||20MHz|
|Nominal reflector voltage change to give 20MHz electronic tuning||15V|
|Max total impedance in reflector to cathode circuit||500k ohms|
Note: the reflector voltage must always remain negative with respect to the cathode. If under AFC working there is
a chance of the reflector voltage becoming equal to, or positive with respect to the cathode, a protective
diode must be used.
|7||Heater + cathode|
The klystron carries the marking RB226 on the body, as well as 'Ref Volts -156'
This file was last modified15:03:59, Tuesday September 02, 2014